Petty Knife 150mm (5.9")

£215.00
| /

In stock

The Petty knife is light and thin with a bit of flex to it and is used for peeling, chopping and trimming. Not used in a hammer grip way meaning you don’t chop up and down like a chefs knife due to not having enough clearance for the knuckles. Mostly used for cutting away from the chopping board but is essential for any knife roll and home kitchen. The general size of a petty ranges from 95mm to 150mm but can go up to 180mm but this is considered to be in a slicing categories.

SG2 (R2) is a high speed powder stainless steel made by Takefu special steel Co Ltd. For some knife makers, this is an ideal steel for knife making as it has a great hardiness of greater than 63HR. This steel has great edge retention, high wear resistance and is stainless. The grains are so fine and uniform that the hammer forging is not necessary. The migaki finish to the knife is the most common finish to japanese knives and is achieved by buffing or polishing the blade until it is shiny, but not mirrored. This finish has different levels, from matt to shiny. The word tsuchime means “hammered” and that’s how this finish is achieved. After the blade has been forged, it will go through a second hammering process with something like a ball-peen hammer to give the distinctive round dimples.

Specifications

Weight: 202g

Handle Material: Black stamina wood/silver nickel bolster

Handle Length: 135mm (5.3")

Blade Length: 150mm (5.9")

Blade Depth: 40mm

Thickness at spine: 2.8mm

Thickness at tip: 1.1mm

Cutting Edge: Double 70/30

Blade Material: Swedish stainless steel

Hardness (Rockwell scale): 59 - 60